CGS Adjustable Charcoal Dividers for Weber Summit Kamado E6 & S6

Create Straight or Angled Charcoal Zones

The CGS Flexible Charcoal Dividers for Weber Summit Kamado E6 and S6 grills let you create straight, angled, or concentrated charcoal zones for two-zone cooking.

The two adjustable 304 stainless steel dividers work on the Summit Kamado’s upper or lower charcoal grate and inside the Weber Summit Kick Ash Basket.

Charcoal Dividers on the Weber Summit Kamado Grate

Position the dividers directly on the Summit Kamado charcoal grate and angle them to create the charcoal pattern that works best for your cook.

The dividers can be arranged to create approximately a ¼-circle, ½-circle, ¾-circle, or straight side-to-side partition. When forming an angle of less than 180 degrees, the divider legs overlap slightly.

For proper positioning, install the dividers with the legs facing outward and away from the lump charcoal. Do not place charcoal on top of the divider feet. Keeping the feet clear allows air to move properly through the charcoal bed.

Charcoal Dividers in the Kick Ash Basket

The Ang-L Dividers work the same way inside the Kick Ash Basket. Position them straight across for a side-to-side split or angle them to create a varied charcoal area.

Why Use a Charcoal Divider?

You can create a smaller fire by simply piling lump charcoal against the curved wall of the grill. However, the charcoal bed becomes progressively shallower as it moves toward the center. That uneven charcoal depth can produce an uneven-burning fire and inconsistent temperatures across the cooking grid.

The Ang-L Dividers create a second wall opposite the curved bowl wall, keeping the charcoal at a consistent depth. A uniform charcoal bed produces a more even-burning fire and more consistent grilling temperatures above it.

The dividers also make it easier to:

• Use less charcoal for smaller meals
• Create dedicated direct and indirect cooking zones
• Concentrate high heat beneath a smaller searing area
• Keep the fire positioned away from food during two-zone cooking
• Adjust the size and shape of the fire for different setups

Flexible Charcoal Divider Specifications

Fabricated from durable stainless steel, the CGS Ang-L Charcoal Dividers are built to withstand repeated high-temperature cooks while providing simple, adjustable charcoal control.

• Includes a pair of adjustable charcoal dividers
• Laser cut from 14-gauge 304 stainless steel
• Designed for repeated high-heat grilling and searing
• Pair weighs approximately 2 lbs.
• Each divider is approximately 3.5 inches tall
• Outer edge is angled to follow the curvature of the Summit Kamado bowl
• Works on the upper or lower Weber Summit Kamado charcoal grate position
• Works inside the Kick Ash Basket

At the lower charcoal level, the dividers can be used with the CGS Spider, CGS Flexible 2nd-Level Expander, or Weber Summit Kamado cooking grid.

At the upper charcoal setting, the dividers cannot be used with the CGS Spider.

Try This Cook: Two-Zone Spatchcock Chicken

This cook is shown in an XL Big Green EGG, but the same setup works in the Weber Summit Kamado.

Position the dividers to fill approximately one-third of the charcoal area and stabilize the grill at a dome temperature of 350–375°F. Place a piece of foil on the charcoal grate beneath the indirect side of the cooking grid to the catch drippings.

Begin with the chicken skin-side down directly over the lump charcoal to start rendering and browning the skin. Then move the chicken to the opposite side of the cooking grid, positioning the breast away from the fire, to finish roasting with indirect heat.

Near the end of the cook, move the chicken back over the charcoal skin-side down as needed to finish crisping the skin.

Frequently Asked Questions

Brand Compatibility & Product Engineering

Ceramic Grill Store is an independent manufacturer and distributor of barbeque accessories. Weber® and Summit® are registered trademarks of Weber Blackstone. Kick Ash Basket® is a registered trademark of Kick Ash Basket, LLC. Trademarked names are used solely to describe product compatibility.

Since 2005, CGS has led innovation in kamado grill accessories.