The Official Website for Ceramic Grill Store

Product Description

Essential Elevated Base for Big Green Egg Tables & Outdoor Kitchens

The Big Green Egg Table Nest provides a sturdy, low-profile support base for your Egg when installed inside a compatible table, custom island, or outdoor kitchen structure. Elevating the ceramic base off flat surfaces creates a crucial air gap beneath the grill to promote airflow and mitigate direct radiant heat transfer to supporting materials.

XL Big Green Egg installed on a metal Table Nest in a custom outdoor kitchen

Table Nest vs. Ceramic Feet: The Table Nest replaces individual ceramic feet when placing a Big Green Egg in a table or outdoor enclosure. Its single-piece connected steel ring structure provides superior load stability while preserving the underlying air gap. Depending on your table substrate (especially combustible wood), additional non-combustible heat barriers may still be required.

Engineered from heavy-duty, powder-coated steel, the Table Nest assembles in seconds using just one screw and nut—delivering a dependable, rigid foundation for custom ceramic grill setups.

Important: The Table Nest must always be housed inside a table frame, island cutout, or surround. It is strictly not designed or intended for freestanding use.

Key Features & Benefits

  • Elevated Thermal Clearance: Lifts the ceramic base to create an essential air gap for continuous airflow beneath the grill.
  • Custom Built-In Compatibility: Purpose-built for installations inside custom wooden tables, masonry islands, and modular outdoor kitchens.
  • Heavy-Gauge Construction: Rigid, powder-coated steel frame resists flex and handles the full weight of heavy ceramic cookers.
  • Low-Profile Design: Maximizes base clearance without adding unwanted overall height to your working table surface.
  • Fast Assembly: Connects securely in seconds with a single bolt and nut assembly.

Fit & Compatibility

Select the Table Nest specifically sized for your Big Green Egg model (2XL, XL, Large, Medium). Correct sizing ensures proper base support and ring alignment under the ceramic bottom.

Note: The Table Nest is engineered solely for framed table and island cutouts. If you require a standalone mobile rolling frame, select an intEGGrated Nest + Handler or traditional freestanding Nest.

Critical Installation & Heat Safety Guidelines

Proper airflow clearance and thermal separation are essential when mounting a high-heat ceramic cooker inside custom enclosures. Review these key Big Green Egg factory safety instructions:

  • Never use a Table Nest as a freestanding stand. The Egg must be fully enclosed within a stable table cutout, cabinet, or island structure to prevent tipping.
  • Maintain continuous airflow beneath the ceramic base. The Table Nest raises the base off flat surfaces. Never block this air space or allow ash and combustible debris to accumulate directly under the metal stand.
  • Incorporate non-combustible thermal barriers. When installing inside wooden or composite tables, place a thick paver or granite tile beneath the Table Nest. When used without a Table Nest, factory guidelines require a minimum 3-inch stacked masonry barrier.
  • Combine granite/paver tiles with the metal Table Nest for maximum protection. This dual-layer setup (paver + Table Nest) is highly recommended for wood outdoor kitchens subject to high-temp sears or overnight low-and-slow cooks.
  • Inspect the mounting area routinely. Periodically inspect underlying wood surfaces or granite pavers for thermal discoloration, heat fatigue, or debris accumulation.

Safety Reminder: While the Table Nest provides essential airflow spacing, it does not completely stop heat transfer. Always adhere to manufacturer clearances and local fire codes for outdoor kitchen builds.

Product Specifications

  • Product: Big Green Egg Table Nest
  • Brand: Big Green Egg
  • Material: Heavy-gauge powder-coated steel
  • Finish: Weather-resistant black powder coat
  • Application: Built-in tables, islands, and outdoor kitchen surrounds
  • Assembly: Single-bolt hardware included
  • Sizing Options: Specific sizes for 2XL, XL, Large, Medium Eggs
  • Freestanding Approval: No (Built-in table use only)

Installation & Maintenance

Assemble the Table Nest frame using the included bolt, then center it flat on a level, structurally sound surface inside your table cutout. Carefully lower the Big Green Egg vertically onto the Nest, ensuring the ceramic base rests evenly across the steel arms.

Inspect the metal frame periodically for finish wear or corrosion. Keep the void under the Egg clean of charcoal dust, ash, and leaf litter to preserve unrestricted airflow.

Need Assistance with Your Table Build?

With over 20 years of hands-on ceramic grill engineering experience, Ceramic Grill Store can assist you in choosing the correct Table Nest, calculating table cutout dimensions, or planning heat barriers for your custom outdoor kitchen.

Visit our Denton, Texas showroom for local advice and in-store pickup, or call 940-387-0100 to consult with our team!

Brand Compatibility & Product Information

Big Green Egg® is a registered trademark of Big Green Egg, Inc. Ceramic Grill Store is an independent retailer and manufacturer not affiliated with or endorsed by Big Green Egg, Inc. Trademarks are utilized strictly for product compatibility identification.

Always consult current Big Green Egg installation specifications and safety manuals prior to building custom enclosure structures. Table Nests are not approved for freestanding operation.

  • 5 stars: 1 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
D
Donald

Great